Publicidad
Idiomas disponibles
Idiomas disponibles
Pop Up Gazebo
With each person holding a gazebo leg in one hand, slide each roof
support upward until it locks into place on the pin near the top of the
leg. If you have difficulty moving the roof supports up, make sure the
gazebo frame is fully extended.
Align the Bottom
Hole with Pin
for Maximum
Leg Height.
Each person should slide the top leg section upward to the
lowest height setting. The locking pin must engage the top hole
completely to prevent the leg from collapsing. Adjust all four legs.
Now select from the three leg heights available. Make sure all four
legs are the same height. See picture for maximum height
setting.
8
support@tdcusainc.com
USA
Assembly Instructions
AFTER SALES SUPPORT
1800 599 8898
USA
Pop Up Gazebo
Important: Do not use excessive force during taking-down.
1. Remove the ropes and stakes at each corner.
2. Remove the metal stakes securing the legs.
3. Disconnect the corner fabric covers from the bottom of the legs.
4. Slide the top leg section fully down.
5. Release sliders at all four corners by gently depressing the push but-
ton and pushing the sliders down a bit.
6. Holding a gazebo leg, each person should move the frame
inward a little at a time. Keep moving inward until the gazebo
is completely folded. Do not push the frame inward too much at
any one time as this may cause damage to the frame.
7. Carefully place the folded gazebo in its carrying bag.
KEEP ALL FLAME AND HEAT SOURCES AWAy FROM THIS TENT FABRIC.
This tent is made with fabric that meets CPAI-84 specifications for
flame resistance. It is not fire proof. The fabric will burn if left in
continuous contact with any flame source. The application of any
foreign substance to the tent fabric may render the flame-resistant
properties ineffective.
AFTER SALES SUPPORT
1800 599 8898
USA
Disassembly Instructions
WARNING
support@tdcusainc.com
USA
9
Publicidad
