English; Working Principle - Johnson Pump SPX Viking Power 16 Manual De Instrucciones

> English
Viking Power 16 mounted to DC motor 12/24 V
Please follow all instructions before attempting an installation.
Typical applications
The Viking Power 16 is a single diaphragm DC-
pump. This pump is the ideal choice for shower
drain, waste water and bilge pumping. Its compact
design and flexible orientation give a very adapt-
able mounting and installation in the boat.
Model number
Viking Power 16 12V 10-13350-03
Viking Power 16 24V 10-13350-04
Features
• 16 L/min (4.2 GPM) at open flow
• 15 L/min (4.0 GPM) at 0.1 bar pressure
• Compact and flexible configuration and installa-
tion
• Quick disconnect fittings (1" or ¾" straight hose
connectors included. 90° as accessory.
• Quiet operation
• Smooth flowing
• Self priming to 3 m (10 feet)
• Pump head can be rotated 360°
• Three alternatives to motor orientation
• Dry running without damage
• No filter required
• Ball-bearing supported transmission
• Low power consumption (30W)
• Meets ISO15083 Small Craft Bilge Pump stand-
ard for boats up to 12 m/40 feet

Working principle

Single-chamber, self-priming diaphragm pump. To
obtain good self-prming ability and a filter-less so-
lution, the pump is designed with a large single dia-
phragm and a long stroke. This way a lot of water is
pushed through the valves in each stroke and any
debris is flushed through.
6
Technical description
Body: Nylon
Valves: Nitrile
Diaphragm: Reinforced nitrile
Connection: K lickTite™ XL connectors
1" or ¾" straight hose connec-
tors included. 90° as accessory
Fasteners: Stainless steel
Fot: Painted zink plated steel
Max. head: 3 meters (10 feet)
Max.
suction lift: 3 meters (10 feet)
Max head
& lift: 4 meters (13 feet)
Motor: 30 W at 1 m head
12/24 V DC (with built-in
thermal protection)
Fuse size: 8 A – 12V / 4 A – 24V
The pump is CE marked according to the following
standards:
• EN55014-1:2000/Radio disturbance
• EN55014-2:1997/Radio disturbance
• ISO8846: Small Craft – Electrical devices – Pro-
tection against ignition of surrounding flammable
gases
• ISO8849:2003/ Small craft – Electrically oper-
ated bilge pumps
• ISO10133: 2001/Small Craft – Electrical systems
– Extra-low voltage DC installations
Drawing
See page 25
Pressure and Capacity data
Pressure Flow
Bar kPa Psi L/min USGPM
0 0 0 16.2
0.1 10 1.5 15.1
0.2 20 2.9 13.7
0.3 30 4.4 12.5
0.4 40 5.8 11.3
Fuse required
Amp. draw
12V 24V
4.2 2.0 1.0
4.0 2.3 1.2
3.6 2.8 1.4
3.3 3.4 1.7
3.0 4.0 1.9
8 A 4 A
Original instructions