Layout (St3); Key Sound (St4); Contrast (St5) - Vetus EC Manual De Manejo Y Instrucciones De Instalación

4.1.3 Layout (ST3)
There are three dif-
ferent layouts for the
compass rose.
Layout 1
SOLID STATE ELECTRONIC COMPASS
Layout 2
• Press in the default mode to enter
the menu.
• Press the /
the Layout menu (ST3).
• Press to enter the Layout menu.
• Use the /
a layout. A part of the selected layout is
shown in the compass rose text field.
• Press short to enter the select-
ed value or
• Press the
value to default (1) or
• Keep pressed for two seconds
to exit to the default mode.
Example:
press:
-> ST1 Course alarm
2X -> ST3 Display Layout
-> Layout 1= N NE E
/ -> Layout 2= N | E
2 seconds -> Default Display (1)
18
100505.01
SOLID STATE ELECTRONIC COMPASS
SOLID STATE ELECTRONIC COMPASS
Layout 3
buttons to select
buttons to select
button to reset the
4.1.4 Key sound (ST4)
The key sound can be switched on or off.
• Press in the default mode to enter
the menu.
• Use the /
the Key Sound menu (ST3).
• Press to enter the Key Sound
menu.
• Use the /
ON or OFF.
• Press
value or
• Press the
value to default (ON) or
• Keep pressed for two seconds
to exit to the default mode.
4.1.5 Contrast (ST5)
The display of the compass can be adjust-
ed for different viewing angles.
Contrast level can be set from 0 up to 9.
• Press in the default mode to enter
the menu.
• Use the /
the Contrast menu (ST5).
• Press to enter the Contrast
menu.
• Use the /
the contrast level.
• Press the
value to default (0) or
• Keep pressed for two seconds
to exit to the default mode.
buttons to select
buttons to select
to enter the selected
button to reset the
buttons to select
buttons to select
button to reset the
Electronic Compass EC