Table of Contents
Warranty ...................................................2
Safety Information
PRECAUTIONS
□
Please read and understand this entire manual
before attempting to assemble, install, or operate
this light fixture.
□
This light fixture requires a 120V AC power source.
□
Some codes require installation by a qualified
electrician.
□
This light fixture must be properly grounded.
□
For best performance, this light fixture should be
mounted approximately 8 ft. (2.4 m) above the
ground.
□
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Warranty
2-YEAR LIMITED WARRANTY
WHAT IS COVERED
This product is guaranteed to be free of factory defective parts and workmanship for a period of two years from
date of purchase. Purchase receipt is required for all warranty claims.
WHAT IS NOT COVERED
This warranty does not include expendable items (such as light bulbs, batteries, etc.), repair service, adjustment
and calibration due to misuse, abuse or negligence. Unauthorized service or modification of the product or of any
furnished component will void this warranty in its entirety. This warranty does not include reimbursement for
inconvenience, installation, setup time, loss of use, unauthorized service, or return shipping charges. This warranty
is not extended to other equipment and components that a customer uses in conjunction with this product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
Installation ................................................5
Operation...................................................8
WARNING: Turn the power off at the circuit breaker or
fuse. Place tape over the circuit breaker switch and verify
power is off at the light fixture.
CAUTION: Burn hazard. Allow the light fixture to cool
before touching.
NOTICE: Do not connect this light fixture to a dimmer switch or
timer.
NOTE: Seasonal Temperature Changes - The closer
the surrounding temperature is to a person's body heat,
the less sensitive the sensor will appear. The greater the
temperature difference, the more sensitive the sensor will
appear. The SENS control might need to be readjusted
toward MIN or MAX as the outside temperature changes
for the different seasons. This is a normal part of the light
sensor's operation.
2