Ninja 200 Manual De Uso página 5

Extractores portátiles
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

DAILY OR AFTER EACH USE
Clean the solution inlet filter (Fig. 4). Loosen tank
attachment screw (Fig. 1) and open unit. Remove filter
cover and strainer screen (Fig. 4). Rinse strainer screen
clean in warm water. Replace strainer and retighten filter
cover.
Clean vacuum ball float valve (Fig. 5). Empty recovery
tank, then open recovery tank lid. Grasp valve assembly
and pull gently toward the front of the unit, taking care
not to distort the strainer screen. Rinse assembly clean
and make sure float ball moves freely inside assembly.
Reinstall strainer and vacuum ball float valve assembly
securely.
AS NEEDED
Lubricate the solution line quick-connect coupling
(Fig. 1D) with a small amount of rust-inhibiting oil such
as LPS-3 or WD-40.
To maintain appearance, wipe interior and exterior
surfaces with a damp cloth. For deep cleaning and a
lasting, protective shine, use an automotive vinyl
cleaner/protectant product.
OPTIONS (PURCHASED SEPARATELY)
Wand and Vacuum Hose Kit (48-103): Wand, 25 ft.
¼ in. solution hose and 25 ft. 1½ in. vacuum hose.
HOSS 700 Rotary Cleaning Tool (67-025). Use with
HOSS 700 Adaptor Kit (48-117).
Upholstery Pro (67-019-P)
WARNING: This product and other substances
that may become airborne from its use contain
chemicals, including lead and phthalates, known to the
State of California to cause cancer, birth defects, or
other reproductive harm. For more information, go to
P65Warnings.ca.gov
07-02231B 200, 200H
FIG. 6: Gravity drain diverter
SPECIFICATIONS
ALL MODELS
Vacuum
6.6 Ametek producing 659 peak air watts
motor
Solution tank 12 gal. | 37.9 l
Capacity
Recovery tank: 10 gal. | 37.9 l
Rotomolded polyethylene housing and handle; 10 in. semi-
Construction
pneumatic wheels.
Closed water
137 in. | 348 cm
lift
One 25 ft. cord (non-heated units)
Power cord
Two 1 ft. cords (heated units) and two 14/3 AWG 25 ft. ext.
cords
Drain valve
Gate type
Float shut-off Ball type
Dimensions
41.5 × 30.25 × 19.75 in. | 105.4 × 76.8 × 50.2 cm
(H × L × W)
Model
Features
200
200 PSI
78-011
200H
200 PSI
78-012
1750W heater
5
Dry weight
Amp draw
94 lbs.
Circuit 1 13.5A
42 kg
102 lbs.
Circuit 1 14.2A
43 kg
Circuit 2 12.5A
Ninja

Publicidad

Tabla de contenido
loading

Productos relacionados para Ninja 200

Este manual también es adecuado para:

200h78-01178-012

Tabla de contenido