SOMFY 121253A Guia De Instalacion página 8

Adding to TaHoma
®
On the TaHoma interface, select the
- Select the Configuration
- Select the "IO" tab, then select "Add".
- Follow the procedure shown on the screen.
- AFTER pairing is complete, the green indicator light will
switch off.
Do not replace the front of the case until the opening and
shock detector has been configured.
Installation
Locations and usage scenarios.
Depending on the usage scenario (Connected Security or
Connected Home), there are several possible installation
configurations: Solutions A,B or C.
Solution A is recommended for a more flexible
application
For Connected Security (TaHoma
• Opening detection
In order to be able to detect intrusion, install the opening and
shock detector as follows:
- A) Unit on the moving part and the magnet on the frame of the
door or window.
- B) Or the reverse depending on your installation.
- C) Unit installed on the moving part only, if the opening
element is not large enough for the magnet to be installed.
8
®
tab.
®
Copyright © 2016 Somfy SAS. All rights reserved.
tab.
serenity):