Intellinet 560993 Manual De Instrucciones página 2

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

16-Port Gigabit Ethernet PoE+ Switch
Thank you for purchasing the Intellinet Network Solutions 16-Port Gigabit Ethernet PoE+
Switch, Model 560993. For specifications, go to intellinetnetwork.com.
CONNECTIONS & INDICATORS
PWR
2
4
6
8
1
3
5
7
LEDs
The LED indicators — Power,
PoE, Link/Activity — make it
easier to monitor the switch
and its connections. NOTE:
All ports provide power to a
connected device, and all
connected devices should
comply with IEEE 802.3af.
Ports
All ports on the switch support Auto-MDI/MDI-X functionality, so crossover cables and
uplink ports are not needed for connections to PCs, routers, hubs, other switches, etc.
Cat5/5e/6 UTP/STP cables provide optimal performance; if a status LED doesn't indicate
a link or activity, check the corresponding device for proper setup and operation.
Power
Use the included power cord to connect the device (on the rear panel) to an AC outlet.
Confirm that the power LED on the front panel is lit.
INSTALLATION
Prior to use, it is recommended that the switch be placed/positioned:
• on a level surface with at least 25 mm (approx. 1") of clearance for ventilation;
• away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
• within 100 m (approx. 328') of network devices it's to be connected to.
Rackmount
The switch includes brackets and screws for optional rack mounting.
1. Disconnect any cables from the switch.
2. Position a bracket over the mounting holes on one side of the switch and secure it
in place with screws.
3. Repeat Step 2 on the other side of the switch.
4. Position the switch in the rack and screw the brackets to the rack.
5. Reconnect any cables.
2
ENGLISH
LNK/ACT/Speed
10
12
14
16
PoE in Use
LNK/ACT/Speed
9
11
13
15
PoE in Use
LED
Power
PoE
Link/Act
2
1
Status
Operation
On
Power on
Off
Check the AC connection; turn the power on
On
Port is linked to a PSE/PoE device
Off
No PSE/PoE device is linked
On
Valid connection: orange = 10/100M; green = 1000M
Blinking
Valid port connection; data transmitted/received
Off
No link established
English
4
6
8
3
5
7

Publicidad

Tabla de contenido
loading

Tabla de contenido