Turbosaver TS-2200 Manual De Usuario página 22

5.
Put one end of the bag on top of the sealing Element,do not into the vacuum cham-
ber.
6.
Close the top cover and press front handle to lock the top cover,you should hear a
"bee" tone,LED screen will display "ready".
7.
Press "Seal only" button to start sealing the bags,LED screen will show the sealing
progress.
8.
When you hear a "bee" tone and LCD screen display "complete",then lift the handle to
open the cover and take the bag out of the machine. The bag is then done and is ready
for vacuum sealing.
Vacuum Packaging with a Bag
1.
Put the items inside the bag. Use only the special designed vacuum
us with vacuum channels.
2.
Clean and straighten the open end of the bag, make sure no dust, wrinkle or ripples.
3.
Place the open end of the bag within the vacuum chamber area, make sure the air
22
bags supplied by