Kathrein UFO 331/TP Manual Del Usuario página 26

*** UFO331TP
Slot
-- Slot unused
PMT oaa
"CI" sub-menu
You can select between the CI module slot "1" display and slot "2" display by setting the slot number using the "<" or ">" key, and
by setting "1" or "2" using the "-" and "+" buttons. If a CI module is plugged into the respective slot (1 or 2), its name is displayed;
otherwise a message that the slot is empty is displayed.
*** UFO331TP
Slot
AlphaCrypt Light
PMT oaa
"CI" sub-menu
If more than one channel is decoded using a CAM (Conditional Access Module), there are different ways by which CAMs manage
the list of these channels. If the fi rst parameter in the bottom line is selected using the "<" and ">" buttons, the "+" and "-" buttons can
be used to select between "Only Add Add", "oaa" and "First More More Last" "fmml".
The second parameter in the bottom line relates to the updating of the PMT if there have been changes to the management
information. When the "<" and ">" buttons have been selected, the "+" and "-" buttons can be used to select between "Update the
complete channel list", "normal" and "List update", "optimised". Whilst practically all CAMs support the "normal" setting, there are
some CAMs that do not permit the "optimised" setting.
Note: An inappropriate "normal" or "optimised" setting can cause loss of all encrypted channels; it may be
necessary to switch the module off and on again to recover from this.
Note: The selection of the channels to be decoded is performed in the Channel fi lter menu.
If the channel fi lter is switched off, no decoding can be performed.
The "TP" transport stream processor is selected using the "<" and ">" buttons and the sub-menu is called up with the "Sub-menu"
button .
The "Filter" channel fi lter is selected if necessary using the "<" and ">" buttons and is called up using the "Sub-menu" button
A 1236
27.500 MS/s
Outp. S21
8 MHz
In addition, for the indications described in "1.12 Transport stream processor: Channel fi lter", if the CI retrofi t kit is fi tted a selection
facility appears in the top line at the far right. This is for decoding the module slot provided (1 or 2), and offers the following
selection options:
"-" = No decoding
1
normal
1
normal
MHz
3/4
306.00
QAM64
Main menu
"1" = Decoding via CAM 1
*** ***
Slot
-- AlphaCrypt Light
PMT
*** ***
Slot
AlphaCrypt Light
PMT
TP ***
QPSK Filter
MHz OID
!
12 / 14
UFO331TP
1
oaa normal
"CI" sub-menu
UFO331TP
1
oaa normal
"CI" sub-menu
UFO331TP
on
off
"Transport stream processor" sub-menu
"2" = Decoding via CAM 2
***
***
.
***
00h CI