Sanitize - Before FI Rst Use & Once Per Day - Medela symphony Manual De Instrucciones

5. Sanitize – Before first use and once per day*
Supplies needed:
• Clean pot for boiling water
• Drinking-quality water
• Tongs
Parts to sanitize:
• Breastshields
• Breastmilk bottles/
containers
• Lids
• Connectors
• Membranes
• Valves
Note
* Sterile kits are ready to use and do
not require washing or sanitizing
prior to fi rst use.
Warning
Breastpump kits are a personal
care item intended for use by a
single user only and should not
be shared between users.
10
1
• Separate all parts that come in
contact with breastmilk.
Note
Sanitize breastpump kit parts once daily.
4
Allow water to cool and gently
remove parts from water with
tongs.
2
• Wash hands thoroughly.
5
• Place parts on a clean surface
and/or towel.
• Allow all parts to air dry.
• Store dry parts in a clean,
cool place when not in use.
Do NOT store wet or damp
parts.
Note
Store the pump kit in a clean
bag/container until next use.
Questions? Visit www.medela.com or call us at 1-800-435-8316.
3
• Fill a pot with enough water to
cover all parts.
• Bring water to a boil.
• Place parts in boiling water for
10 minutes.
Note
If you notice a white residue on your
parts after boiling, you may have a
high mineral content in your water.
Remove residue by wiping parts with
a clean washcloth and air dry. We
recommended that you boil parts with
distilled water to prevent substantial
mineral build-up over time which may
compromise your parts.
You may also sanitize your
kit parts by following the
instructions on Medela's Quick
Clean Micro-Steam bag.
™ ™
(sold separately)
11