Muskoka 310-42-45 Manual Del Usuario página 13

Operation (continued)
ADJUSTING THE AMBIENT SIDE LIGHTING
□ Press the side light control button (5) to turn on the
ambient lighting.
□ To change the color of the lighting press the side light
control button (5) again. You can control the side lights
color as described in the table. The color rotation mode
will cycle through different color settings continuously.
HEATER LOCKING FUNCTION
□ To turn off heat mode, press and hold the flame button for 5 seconds to enter heat lock out mode. Flame lights will flash
5 times to signal the heat function is turned off and locked out. To turn on heat mode, press and hold the heat button for 5
seconds. The flame lights will flash 5 times and the heat function will be restored. When the heat button is pressed in lock
out mode, the ember bed will flash 5 times until the heating mode is turned on.
USING THE EMBER BED / LOGSET CONTROL BUTTON
□ Pressing the ember bed control button (7) once will light the ember bed. Continue to press the ember bed control button (7)
to cycle through different colors of the ember bed. Reference the table for more information.
Button Press 1
Ember bed/
Orange
Logset
Display 1
2 3
Green Blue
2 3
Button Press Side Light Color
1st Press Blue
2nd Press Red
3rd Press Cycle
4th Press Off
4 5
Red/Blue
Red
(Mix to Purple)
4 5
Display
6 7
Red/Green/Blue
Cycle
(Mix to White)
6 7
13