Maintenance; Glass Information - HAMPTON BAY 25-803-68 Guía De Uso Y Cuidado

Maintenance

GLASS INFORMATION

□ Under no circumstances should this product be operated with broken glass.
□ Do not strike or slam the glass.
□ Do not use abrasive cleaners to clean the glass.
□ This product uses tempered glass. Replacement of the glass supplied by the manufacturer should be done by a qualified
service person.
LIGHT BULB INSPECTION AND REPLACEMENT
WARNING: Light bulbs become very hot during use. Allow
at least 10 minutes for the bulbs to cool before touching.
WARNING: Do not exceed 40 watts per bulb. Use of
higher rated bulbs may result in a fire, causing property
damage or personal injury.
CAUTION: Do not operate this heater without the access
panel in place. Do not remove the back cover of this heater.
There are no serviceable parts inside.
The flame effect is created by two 40-Watt light bulbs with an E-12
(small) socket base. Use only this type of light bulb. If the flame \
effect does not work, the bulbs may have come loose or been
damaged during shipping.
To inspect or replace the bulbs:
□ Unplug the power cord from the outlet.
□ Locate the access panel on the back of the stove.
□ Remove the screws and the panel.
□ Check the bulbs to be sure they are finger tight
and in working order.
□ Replace any damaged or faulty bulbs.
Reattach the access panel.
A
WARNING: Do not exceed 40 watts per bulb. Use of higher rated bulbs may result in
kA
a fire, causing property damage or personal injury.
12