Troubleshooting; Technical Service - Southland SHB25170.1 Manual Del Operador

Troubleshooting

• Save all instructions
PROBLEM
Engine will not start.
Engine will not accelerate, lacks
power or stalls.
Engine smokes excessively.
Engine runs hot.
Engine will not idle properly.

Technical Service

You may have further questions about assembling, operating, or maintaining this Blower. If so, you can contact our
Technical Service Department at 1-800-737-2112 (English only).
You may also write to:
CORRESPONDENCE ONLY:
MAT Engine Technologies, LLC
ATTN: Technical Service – METL
6700 Wildlife Way
Long Grove, IL 60047
When contacting the Technical Service Department,
have ready:
• Your Name
• Your Address
• Your Phone Number
Questions? Call Toll Free at 1-800-737-2112
POSSIBLE CAUSE(S)
1. Engine flooded.
2. Fuel Tank empty.
3. Spark Plug not firing.
4. Fuel not reaching carburetor.
5. Carburetor requires adjustment.
1. Engine has not reached operating
temperature.
2. Choke lever in the "cold start" position.
3. Fuel not reaching carburetor.
4. Air filter dirty.
5. Spark plug fouled.
6. Carburetor requires adjustment.
7. Carbon build-up on muffler outlet
screen.
8. Compression low.
1. Choke lever in the "cold start" position.
2. Fuel mixture incorrect.
3. Air filter dirty.
4. Carburetor requires adjustment.
1. Fuel mixture incorrect.
2. Spark Plug incorrect.
3. Carburetor requires adjustment.
4. Carbon build-up on muffler outlet
screen.
1. Carburetor requires adjustment.
2. Crankshaft seals worn.
3. Compression low.
ENG - 10
SOLUTION(S)
1. See Starting a Flooded Engine in
OPERATION section.
2. Fill tank with correct fuel mixture.
3. Replace Spark Plug.
4. Check for kinked or split fuel line; repair or
replace. Check fuel filter.
5. Contact a qualified service center.
1. Allow engine to idle and warm up until full
operating speed can be attained.
2. Move choke lever to the "warm start/run" position.
3. Check for kinked or split fuel line; repair or
replace.
4. Clean air filter.
5. Clean or replace plug
6. Contact a qualified service center.
7. Contact a qualified service center.
8. Contact a qualified service center.
1. Move choke lever to the "warm start/run" position.
2. Empty Fuel Tank and refill with correct fuel
mixture.
3. Clean or replace air filter.
4. Contact a qualified service center.
1. See Mixing Fuel with 2-Cycle Oil in
OPERATION section.
2. Replace with correct Spark Plug.
3. Contact a qualified service center.
4. Contact a qualified service center.
1. Contact a qualified service center.
2. Contact a qualified service center.
3. Contact a qualified service center.
If you need assistance or have any questions,
CALL TOLL FREE: 1-800-737-2112
• Model Number of Product
• Date of Purchase (include copy of receipt for written requests)
Copyright © 2015 MAT Engine Technologies, LLC