Assembly; Attaching Handle - Panasonic MC-V7600 Instrucciones De Operación

Handle
Manche
Mango
Handle Screw
Vis du manche
Tornillo del mango
Electrical
Connection
Connexion
électrique
Conexión
eléctrica
Locking
Notch
Encoche
de blocage
Hendidura
de fijación
Power Cord
Cordon
d'alimentation
Cordón
electrico
Power
Cord
Cordon
d'alimentation
Cordón
electrico
Lower
Cord Hook

ASSEMBLY

Attaching Handle

1)
➢ DO NOT plug in until assembly is
complete.
➢ Turn ON-OFF switch OFF.
➢ Remove two (2) handle screws
provided.
➢ Position handle as shown in
Note: Do Not
Remove Tape
Remarque : Ne pas
➢ When installing the handle, firmly
retirer la bande
adhésive
Nota: No quita cinta
Tape
Bande
➢ Insert screw.
adhésive
Cinta
➢ Tighten screws.
2)
➢ Make sure the quick release upper
➢ Remove the wire tie from the power
➢ Lock the power cord into the locking
Note: This helps keep the power cord out
from under the vacuum cleaner agitator.
Quick Release
3)
Upper Cord Hook
Crochet supérieur
➢ Wrap the power cord around the upper
de rangement du
cordon à dégagement
and lower cord hooks and lock the
rapide
power cord plug onto the power cord.
Sujetador de
liberación rapida
del cordón
Crochet de cordon
inférieur
Compartimiento
inferior para el
cordón
- 12 -
illustration.
press the handle onto the body.
Secure with handle screws provided.
cord hook is in the upright position.
cord.
notch base by pressing it into the
quick release upper cord hook as
shown.