Tabla De Contenido; Safety Information - HAMPTON BAY E503-WH Guía De Uso Y Cuidado

DPA12122006 新版 SIZE:216x280mm 80g模糙纸 24P 单黑色 骑马钉 2013-4-17 第 2／24页
Table of Contents
Table of Contents .......................................................... 2
Safety Information ......................................................... 2
Warranty ......................................................................... 3
Pre-Installation .............................................................. 3
Planning Installation ................................................................3
Tools Required .........................................................................3
Hardware Included ...................................................................4
Package Contents ....................................................................5

Safety Information

1. All wiring must be in accordance with the National Electrical
Code ANSI/NFPA 70-1999 and local electrical codes.
Electrical installation should be performed by a
licensed electrician.
2. The outlet box and support structure must be securely
mounted and capable of reliably supporting a minimum of
35 lbs. (16 kg). Use only UL-listed outlet boxes marked "For
Fan Support."
3. Do not operate the reversing switch while the fan blades are
in motion. You must turn the fan off and stop the blades
before you reverse the blade direction.
4. Avoid placing objects in the path of the fan blades.
5. Electrical diagrams are for reference only. Light kits that are
not packed with the fan must be UL-listed and marked
suitable for use with the model fan you are installing.
Switches must be UL General Use Switches. Refer to the
instructions packaged with the light kits and switches for
proper assembly.
6. After making electrical connections, spliced conductors
should be turned upward and pushed carefully up into the
outlet box. The wires should be spread apart with the
grounded conductor and the equipment-grounding
conductor on one side of the outlet box.
Installation ..................................................................... 6
Operation ..................................................................... 10
Care and Cleaning ...................................................... 11
Troubleshooting .......................................................... 11
WARNING: To reduce the risk of electric shock, ensure
electricity has been turned off at the circuit breaker or fuse
box before beginning.
WARNING: To reduce the risk of personal injury, do not
bend the blade brackets (also referred to as anges) during
assembly or after installation. Do not insert objects in the
path of the blades.
WARNING: To reduce the risk of
not use this fan with any solid-state speed control device.
CAUTION: To reduce the risk of personal injury, the fan
must be mounted with a minimum of 7 feet clearance from
the trailing edge of the blades to the
2
or electric shock, do
or.