FAAC Night ONE Day Manual De Instrucciones página 42

6.2 Cable exit
Only for lay-outs 6 and 7:
• route the electric cable through the tube in PVC (see image Fig.13).
IMPORTANT: the electric cable must not be in contact with any mobile part.
IMPORTANT: You must hold the cable as tight as possible.
6.3 Assembly
1) Fit the transmissions at each end, making sure that the reinforcement is correctly fitted.
2) Fit the hexagonal transmission rod in the hexagonal hole of the transmission
3) Fit the rod on the motor frame and firmly tighten screw A. (Fig.14)
To facilitate the operation, rotate
the transmission hexagon with a
No. 0 spanner.

Fig. 13
A
Fig. 14