Maintenance - Toto TBV02405U Manual De Instalación Y Del Propietario

Cleaning the Valves
• Accesing the valve body
1. Remove the temperature control handle and the push button.
2. Remove the trim and lining plate.
• To clean filters on service stops
1. Shut off the main Hot and Cold water supply.
2. Remove service stop units.
3. Rinse the filter on the service stop in water to remove any debris.
• To clean the thermostatic unit and diverter cartridge
1. Shut off the Hot and Cold water supply at the service stops.
2. Remove the thermostatic cartridge sleeve with an adjustable wrench.
To remove the thermostatic unit, insert the flat-head screwdriver into
the slot on the valve body and gently pry it loose.
3. Remove the screw and fixing plate securing the diverter cartridge,
then insert the flat-head screwdriver into the slot on the valve body
and gently pry it loose
4. After removing the thermostatic unit and diverter cartridge, clean it by
using water and a toothbrush or a similarly soft-bristled brush on the
filter screens of the unit.
IMPORTANT!
DO NOT use a wire or steel brush
as this may damage the unit.
Trim
Push Button
Temperature
Control Handle

MAINTENANCE

Fixing Plate
Screw
Service Stop
Lining Plate
Thermostatic
Cartridge
Sleeve
Diverter
Cartridge
Thermostatic
Unit
11
Valve Body
Service Stop