Product Maintenance - Niko 16-601 Manual Del Usuario

MODULES
As a standard, the parameters are set to maximum. By adjusting potentiometer 1, you can avoid
overexposure.
potentiometers
11.4. Technical data
Dimensions: ................................................. L 100 x H 50 x W 40mm
Weight:........................................................ 174g
Operating temperature: ................................ -20 to 70°C
Enclosure: ................................................... aluminium (enamelled)
Protection against dust and water: ................ IP44
Connector: ................................................... 34-pole: connection to other modules
Power supply voltage:................................... SELV (12V DC)
Consumption in case of max. brightness: ....... 2W

12. pRODUCT MAINTENANCE

By means of the maintenance tips below, we want to ensure that the surfaces of these luxury products
are not damaged by improper use. Damage by improper use is not covered by the guarantee.
Maintenance tips
- It is sufficient to clean the products with soap and a damp cloth.
- We strongly advise against the use of the following products:
- Abrasive sponges or abrasive detergents;
- Maintenance products that contain solvents or acids, or cleaning products containing acetic acid.
Note!
Damage by improper use is not covered by the guarantee.
13. LEGAL WARNINGS
- The installation has to be carried out by a qualified person and in compliance with the statutory
regulations.
- This user manual has to be handed over to the user. It has to be included in the electrical installation
file and has to be passed on to any new owners. Additional copies are available on the Niko website
or via the support service.
EN
P2
P1
fig.7
55