Festo CPV GE-ASI-4E4A CE Serie Instrucciones Para El Usuario página 20

3.4 Connecting sensors (PNP inputs)
Use cable type NEBU−... or KM8−M8−GSGD−... and plug
with union nut and M8x1 thread for connecting sensors.
Fasten the plugs/sockets with the aid of the union nut in
order to prevent unintentional loosening, e.g. due to shock.
Seal unused sensor connections with the protective caps
type ISK−M8. Only in this way can you comply with protec
tion class IP65.
Please note
The inputs have been designed in accordance with
IEC 1131−2 type 02.
The inputs are short−circuit proof. In the event of a
short circuit the slave will be switched off. The
AS−Interface master then regards this slave as
absent. The slave reports back as functioning once
the short circuit has been eliminated.
1
Pin assignment
1: 24 V
3: 0 V
4: Input Ix+3
20
Festo CPV...−GE−ASI−4E4A−...−CE
4
3 1
1
0703NH
English