Unpacking And Installation - XYZ Printing PartPro200xTCS Manual Del Usuario

Unpacking and Installation

1
Move the printer to a table or plat-
form. (Do not move the printer by
yourself as it is heavy.)
3
Remove the packaging materials, top cover box, assessory box and plastic cover.
4
Remove the tape on the
body (4 in total).
7
Remove the foam on the
cartridge holder.
9
Remove the cable tie and foam in front and back of the front
door.
2
Remove the plastic wrap and PP.
5
Open front door, remove the tape at mark printer door
post.
8
Remove the foam next to the guide screws on both sides, and then remove the foam under
the print bed.
6
Open the front door. Remove
the tape from the supporting
materials and print bed.
P5 P5