Error Code Displays - Royal Sovereign RBC-4500 Manual Del Propietário

ERROR CODE DISPLAY
After start, the machine will go on self-check automatically. If preset window show the following error code, generally speaking, it is
because of dust on the surface or sensor blocked by notes. So please clear the dust on the surface of sensor with brush or soft cloth, or
take the notes away. Then restart the machine.
Error code
UV CHECK FAIL
NL CHECK FAIL
NR CHECK FAIL
IRL CHECK FAIL
IRR CHECK FAIL
STACK CHECK FAIL
HOPPER CHECK FAIL
ENCODE disc CHECK FAIL
During counting, if error code appears and the machine stops, please solve it referring to the following methods according to what displays.
Error code
HALF Half sheet. Eliminate the note. Press "reset" and count continuously.
Double-notes. Put the notes( from stacker) onto the note-feeding table again, press "reset" key to count again. If EA2 often
DOUBLE
appears, please adjust the position of adjustment knob referring to "Confirm the position of note thickness adjustment knob".
CHAIN Jointed notes. Put the notes from stacker onto note-feeding table again, press "reset" key to count again.
JAM
Jammed notes. Turn off the machine, turn the note-feeding wheel by hand, and take out the note from the machine.
UV, MG, DD
Fake note or questionable note. Eliminate this note, press "reset" and count continuously.
UV sensor
Left counting sensor
Right counting sensor
Left double-notes sensor
Right double-notes sensor
Note-receiving sensor
Note-feeding sensor
Width sensor
Reason and trouble shooting
11
Trouble position
RBC-4500