Power Section - Peavey XR696 Guía De Operación

POWER SECTION

(1200 SC Module with DDT
Frequency Response:
+0, -1 dB, 20 Hz - 20 kHz @ rated power
Rated Power:
• 600 Watts program into 4 Ohms, both
channels driven / 500 Watts RMS into 4 Ohms,
both channels driven
• 475 Watts program into 8 Ohms, both
channels driven / 360 Watts RMS into 8 Ohms,
both channels driven
Total Harmonic Distortion:
Less than 0.1% @ 1 kHz @ rated power
DDT Dynamic Range:
Greater than 26 dB
DDT Maximum Distortion:
Below 0.5% THD for 6 dB overload
Below 1% THD for 20 dB overload
XR 696/1200 SC AMPLIFIER SPECIFICATIONS
®
)
™
Hum and Noise:
-97 dB below 500 Watts
Damping Factor:
Greater than 100 @ 1 kHz, 4 Ohms
Input Sensitivity:
2.2 V RMS for 500 Watts @ 4 Ohms
Input Impedance:
2 k Ohms
Power Requirements:
500 Watts, 120 V AC, 60 Hz, Nominal
Dimensions:
Width: 19.0"
Height: 10.75"
Depth: 11.0"
Weight: 41.9 lbs.
15