English - Lenco MC-013 Manual Del Usuario

English

WARNING
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
This product contains a low power laser decive.
Warning: Do not touch the lens.
DO NOT THROW BATTERIES IN FIRES !
CAUTION
Usage of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure�
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
1� Do not cover or block any ventilation openings� When placing the device on a shelf, leave 5 cm (2") free
space around the whole device�
2� Install in accordance with the supplied user manual�
3� Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-
generating products or naked flame. The device can only be used in moderate climates.
Extremely cold or warm environments should be avoided� Working temperature between 0° and 35°C�
4� Avoid using the device near strong magnetic fields.
5� Electrostatic discharge can disturb normal usage of this device� If so, simply reset and restart the
device following the instruction manual. During file transmission, please handle with care and operate
in a static-free environment�
6� Warning! Never insert an object into the product through the vents or openings. High voltage flows
through the product and inserting an object can cause electric shock and/or short circuit internal parts�
For the same reason, do not spill water or liquid on the product�
7� Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools�
8� The device shall not be exposed to dripping or splashing and make sure that no objects filled with
liquids, such as vases, are placed on or near the apparatus�
9� Do not use this device when condensation may occur� When the unit is used in a warm wet room with
damp, water droplets or condensation may occur inside the unit and the unit may not function properly;
let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry
before getting any power�
10� Although this device is manufactured with the utmost care and checked several times before leaving
the factory, it is still possible that problems may occur, as with all electrical appliances� If you notice
smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the
plug from the main power socket immediately�
11� This device must operate on a power source as specified on the specification label. If you are not sure
of the type of power supply used in your home, consult your dealer or local power company�
12� Keep away from animals� Some animals enjoy biting on power cords�
CAUTION
INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCKS DEFEATED.
AVOID EXPOSURE TO BEAM
3