Preparing Beverages; Preparing Espresso And Café Crème - melitta CAFFEO PASSIONE OT Instrucciones De Operación

5

Preparing beverages

There are two options for preparing beverages:
ū Standard dispensing as described below,
ū Selection and preparation of a recipe (see section 5.6 Preparing further
beverage specialities with recipes on page 25).
Information
The default settings for standard dispensing or for a recipe can be perma-
nently changed (see section 6.1 Changing default settings on page 29).
Note:
ū There should always be sufficient water in the water tank. If the filling
level is too low, the appliance requests you to refill it.
ū There should always also be sufficient coffee beans in the bean con-
tainer. If there are no longer any coffee beans present, the appliance
stops the preparation of a coffee beverage.
ū The appliance does not indicate a lack of milk.
ū The vessels for the beverages should be sufficiently large (see Table
Factory settings on page 45).
5.1 Preparing Espresso and Café Crème
Requirement: The ready symbol appears on the display.
1. Place a vessel beneath the outlet.
2. Press the "Espresso" or "Café Crème" button.
» The grinding process and beverage dispensing start.
» Beverage dispensing is ended automatically.
3. Remove the vessel.
» The ready symbol appears on the display.
Preparing beverages
23