Lorex LNZ3522B Manual De Instrucciones página 13

5 Connecting the Camera
Step 1 of 2 — OPTION A: Connecting the camera to your local
network using an optional PoE switch:
1. Connect an Ethernet cable of up to 300ft (91m) rated CAT5e or
higher (not included) from the LAN port on an external PoE switch
(sold separately on
Connect the power cable to the PoE switch and to a power outlet
or surge protector.
Note
Terminology may vary depending on the model of PoE switch
you have.
2. Connect the camera to the PoE switch using the included Ether-
net cable (or a CAT5e Ethernet cable of up to 300ft (91m)). The
PoE switch will provide power and video transmission the same
way as your NVR.
#; r. 1.0/19290/19290; en-US
www.lorextechnology.com) to your router.
8