First Time Use - Farberware FCD06ASWWHC Manual De Instrucciones

FIRST TIME USE

FILL THE RINSE AID DISPENSER
Rinse aid dispenser
The rinse aid is released during the final rinse to prevent water from forming droplets on your
dishes. That can leave spots and streaks. It also improves drying by allowing water to sheet
off the dishes. Your dishwasher is designed to use liquid rinse aids. The rinse aid dispenser is
located inside the door next to the detergent dispenser. To fill the dispenser, open the cap
and pour the rinse aid into the dispenser until the level indicator turns completely black.
The volume of the rinse aid container is about 110ml.
Function of rinse aid
Rinse aid is automatically added during the last rinse, ensuring
thorough rinsing, and spot and streak free drying.
WARNING: Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any
other substances (e.g. Dishwasher cleaning agent, liquid detergent). This would damage the
appliance.
When to refill the rinse aid dispenser
If there is no rinse-aid warning light in the control panel, you can judge the
amount of rinse-aid by the color of the optical level indicator "C "located next to
the cap. When the rinse-aid container is full, the whole indicator will be dark.
As the rinse-aid diminishes, the size of the dark dot decreases.
You should never let the rinse aid get below 1 / 4 full.
Full
3/4 Full
1/2 Full
1/4 Full - Should refill to eliminate spotting
Empty
To open the dispenser,
turn the cap to the "open"
(left) arrow and lift it out.
NOTE:
cloth to avoid excessive foaming during the next wash. Don't forget
to replace the cap before you close dishwasher door.
9
Pour the rinse aid into
the dispenser, being
careful not to overfill.
Clean up any rinse aid split during filling with an absorbent
Filter Assembly
Replace the cap by inserting
it aligned with "open"
arrow and turning it to the
closed (right) arrow.