The filter efficiently removes food particles from the wash water, allowing it to be re-
cyclated during the cycle. For best performance and results, the filter assembly must be
regularly. For this reason, it is a good idea to remove the larger food particles trapping
in the filter after each wash cycle by rinsing the filter and cup under running water.
To remove the filter assembly, pull on the cup handle in the upward direction.
WARNING: Never run the dishwasher without the filters in place. The dishwasher
must never be used without the filters. Improper replacement of the filter may
reduce the performance level of the appliance and damage dishes and utensils.
C
B
NOTE:
If do it from Step 1 to Step 3, the filter system will be removed;. If
you do it from Step 3 to Step 1, the filter system will be installed.
Inspect the filters for blocking every time the dishwasher has been used.
By unscrewing the coarse filter. you can remove the filter system. Remove
any food remnants and clean the filters under running water.
NOTE:
The entire filter assembly should be cleaned once a week.
Step 1: Contrarotate the
filter assembly (A, B and
C). Then lift it all up.
Step 2: Lift B and C up from A.
A
C
B
The end.
A
18