Ground Fault Circuit Interrupter - GreenWorks GPW 2001 Manual De Instrucciones

ELECTRICAL
W A R N I N G
Keep the cord clear of the working area. Position the cord so that it will not get caught on lumber,
tools, or other obstructions while you are working with a power tool. Failure to do so can result in
serious personal injury.
W A R N I N G
Double insulation is a concept in safety in electric power tools, which eliminates the need for the
usual three-wire grounded power cord. All exposed metal parts are isolated from the internal
metal motor components with protecting insulation. Double insulated products do not need to be
grounded.

GROUND FAULT CIRCUIT INTERRUPTER

This unit is equipped with a Ground Fault Circuit Interrupter (GFCI), which guards against the
hazards of ground fault currents. An example of ground fault current is the current that would
GFCI plugs do not protect against short circuits, overloads, or shocks.
W A R N I N G
TO PROTECT AGAINST ELECTRIC SHOCK TEST BEFORE EACH USE
‡ PLUG INTO RECEPTACLE
‡ IF THE GFCI LIGHT IS NOT ON, PRESS THE RESET BUTTON, THE LIGHT SHOULD COME
ON
‡ PRESS TEST BUTTON, LIGHT MUST GO OFF
‡ PRESS RESET BUTTON AGAIN FOR USE
DO NOT USE IF TEST FAILS
DO NOT USE AN EXTENSION CORD TO SUPPLY POWER TO THIS DEVICE
RAINPROOF
DO NOT IMMERSE
9
, or earth.