Tighten Torso Straps - MSA Arneses estilo V-FLEX Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3.3

Tighten Torso Straps

The harness must be close-fitting with the sternal and dorsal connections in their proper positions as
shown.
The D-rings on the waist adjustment Belt are not to be used for Fall protection.
Failure to follow these warnings can cause serious personal injury or death.
Crossover & Rigger Style
Pullover Style
Adjust the torso straps by feeding webbing to/from the right side, through
right hip, chest and left hip hardware to the torso sizing adjuster on left.
US
V-FLEX, V-FIT, V-FORM
Lengthen or shorten torso straps by sliding webbing through adjusters.
Vest Style without Front D-Ring
14
WARNING!
(1)
Torso
adjustment
(2)
Waist
adjustment
Leg strap
adjustment
Pull
Slide keeper away from buckle.
Lengthen or shorten strap by feeding or drawing webbing through
adjusters.
Pull
MSA Harness
Lengthen or shorten torso straps by
sliding webbing through adjusters.
NOTE: Depending on harness model,
this adjustment may be in a downward or
upward direction.
Silde
adjuster
Torso
adjustment
Keeper

Publicidad

Tabla de contenido
loading

Tabla de contenido