Setting The Display Backlight; Adjusting The Time - Auriol HG02934 Instrucciones De Utilización Y De Seguridad

First remove the protective film from the
LC-display of the light alarm clock.
3
A plastic strip protrudes from the battery
compartment cover
of the light alarm clock. Remove this plas-
tic strip to utilise the inserted batteries.
Plug the low voltage plug
supply into the low voltage jack
29
the light alarm clock. Then plug the mains
supply into an easy to access socket.
Your light alarm clock is now in clock mode.
The clock starts at 00:00.
Setting the display
backlight
Use the slide switch
backlight intensity on the LC-display
Choose from the settings OFF, LO, ME
and HI.

Adjusting the time

In clock mode, press the CLOCK button
for approx. 3 seconds to enter setup
mode.
Press the + button
to change the respective flashing value.
52 GB/MT
on the underside
11
of the mains
30
of
8
to adjust the
4
.
3
15
or the − button
19 20
TIP: Holding the + button or the − button
will rapidly scan forward or backward
through the numbers. When no button is
pressed for 30 seconds, the light alarm
clock with automatically return to clock
mode.
Briefly press the CLOCK button to confirm
the setting. This will take you to the next
clock settings option.
This allows you to successively adjust the
following values:
· Year
· Month
· Day
· Hour
· Minute
· 24/12 hour display - in 12 hour
mode the time from 12 to 23:59 will
show PM next to the time.
· Language for displaying the
day of the week - Abbreviations for
languages: GE for German, EN for Eng-
lish, FR for French, DU for Dutch, SP for
Spanish, IT for Italian.
Set the desired language by pressing the
CLOCK button. The light alarm clock will
then return to clock mode.