Getting Started; Helpful Hints; Care & Cleaning - Twin-Star International 18MM3207 Manual De Instrucciones Adjunto

PLEASE READ AND FOLLOW ALL SAFETY TIPS
1. Before assembly, carefully use scissors or utility knife to cut and unwrap all parts. Make sure you do not
discard the hardware.
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer Service:
parts@twinstarhome.com or call 1-866-661-1218 in English, 1-866-374-9203 in French or
1-866-661-1218 in Spanish. Please identify the parts you need and model number. Make sure to include
your name and address.
DO NOT MOVE MANTEL OR INSERT WHILE PLUGGED INTO POWER SUPPLY.
• Some steps are more easily handled with two adults.
• Attach the fi replace insert to the completed wood mantel last. Install insert in from the back of the
fi replace so as not to scratch the hearth/base.
• Use care in assembling your new fi replace, take your time and use the hardware provided and a quality
Phillips head screwdriver.
NEVER OVER TIGHTEN BOLTS.
• Do not sit on any part of the mantel.
1. Dust your fi replace regularly with a soft non-lint producing cloth or household dusting product.
2. You can clean your fi replace with a gentle non-abrasive household cleaner. Make sure to dry your
fi replace immediately with a soft cloth or towel.
For a complete tight fi t every bolt
should have a fl at washer.
All panels are labeled Left and Right as viewed
from the front of unit.
1. Locate Center Left Side Panel (B) and Left
Front Panel (I) and set out on a scratch free
surface. Align the holes in the Center Left Side
Panel with the mounting blocks on the Left
Front Panel and attach using Bolts (L1) and
Washers (M) through the pre-drilled holes.
HAND TIGHTEN ONLY.
Repeat with Right Front Panel (J) and Center
Right Side Panel (C)
E-2

GETTING STARTED

CAUTION:

HELPFUL HINTS

CARE & CLEANING
Right
Front
Panel
J
Left
Front
Panel
I
C
Center
Right
Side
Panel
M
L1
Center
B
Left
Side
Panel