Cleaning The Feed Dog; Oiling The Machine - Texi Joy 13 Manual De Usuario

EN

CLEANING THE FEED DOG

Remove the needle and the presserfoot.
Remove the needle plate set screws and remove the needle plate.
With a brush, clean out dust from the feed dog teeth. Insert the needle plate.

OILING THE MACHINE

Apply a few drops of fine quality sewing machine oil to the point indicated by the
arrows in the figures.
For machine in constant use, oil two or three times a year.
In case the machine does not work smoothly due to standing idle for some time,
apply a few drops of kerosene at the oiling point, and run the machine rapidly for a
minute.
Before oiling, wipe off oiling points.
Texi Joy 13 71
Texi Joy 13 instrukcja 2017.indd 71 16/01/17 19:22