GB
5.2.1 Moving with lifting truck
The DT-Mobile can be moved with the lifting truck
on a firm, level surface.
The lifting point is between the forklift slots on the
underside.
5.2.2 Loading with a forklift
Important!
i
Use the provided forklift slots on the
underside as lifting points for safe lifting
with the forklift.
5.2.3 Loading with a crane
Danger!
A DTMobile can cause severe injuries
if it falls.
Do not stand under suspended loads
during crane operations.
Do not damage the lid
with the crane slings!
• the crane lugs provided at the top of the tank
are to be used for
crane operations.
• attach 4 suitable load
handling devices of
equal length to the
crane lugs
(minimum
length 2 m).
• the DT-Mobile can
be loaded onto
or unloaded
from the
transport
vehicle.
34
5.3 Transporting
During transport, observe the pertinent regulations
for transport and securing loads, in particular:
• road traffic (licensing) act of the country
in question.
• CEN 12195 Parts 1 to 4 for calculation
and lashing.
Use the crane lugs for placing of the tension belts
when fastening to the transport vehicle.
i
Important!
Positive fit before traction!
First, try to positively load the equipment
(e.g. through striking the sides).
Recommendation:
Use a non-slip mat.
5.4 Filling the tank
Pay attention to the horizontal alignment and ensure
the tank is adequately secured!
Ban on fire, naked flames
and smoking.
1. Open the lid of the DT-Mobile.
2. Unscrew the cap from the filling connection b.
3. The container is filled using a delivery nozzle
with an automatic shut-off.
4. Check the level inside the tank using the fill-
level indicator d.
5. Screw the cap of the filling opening back on
tightly.
6. Contamination caused by the filling process
must be removed immediately with a dry cloth.
7. Close the lid of the DT-Mobile.