Mounting The Camera - ZOSI Z18.5.T.1 Guia De Instalacion

Mounting the Camera

The camera can be mounted onto a fl at, vertical surface using screws. The surface must have suffi cient strength to hold
the camera. Materials such as hardwood, brick or masonry are good options, You can mount the camera onto a metal
surface, but you'll need to supply your own mounting hardware.
Positioning the Cables
1.When running your cable, try to avoid bending
it at sharp angles.
2.Don't put your cable near live electrical wiring.
AC electricity generates radio "noise" which can
interfere with the signal from your camera.
3.All wiring and connectors must be suitably
insulated and protected from moisture and
sunlight because they are not weather resistant.
Please note, model shown is for
illustration purposes only.
Camera
Infra-red
lens
LEDs
2
Video
Connector
Power
Connector