Operating Controls - Siemens VDO MTCO 1324 Instrucciones De Servicio

Operating controls

a) "Blocked drawer"
b) "Hinged drawer"
Note
The operation of both device designs is, in
principle, identical. Operating steps which de-
viate from the normal procedure are listed
separately.
1) Left-hand keypad
Key for unlocking the drawer.
Key for adjusting the time group for
driver 1.
2) Right-hand keypad
Key for adjusting the time group for
driver 2.
Key for selecting the following func-
tions:
• "Time Adjustment",
➥ see page 31.
• Display "Error Memory",
➥ see page 32.
Keys for adjusting the time and for
displaying the current error mes-
sages.
26
(Page 2, figure I)
3) Display
• The basic display is shown permanently.
• Messages / notes are displayed
automatically, ➥ see page 32.
4) Separating plate
between driver 1 and driver 2 chart.
5) Checkpoint marking
for checking the temporally correct posi-
tion of the chart carrier.
6) "Pear-shaped" chart carrier
7) Nameplate
The manufacturer, device type, inspection
mark and serial number are indicated
here.
Date + time
Chart + time group
symbol, driver 2
Error symbol
Total kilometre reading
Chart + time group
symbol, driver 1
Kienzle MTCO 1324