ASROCK K8NF4G-SATA2 Manual De Uso página 18

Idiomas disponibles

Before you start to configure the RAID function, you need to

check the installation guide in the Support CD for proper configuration.

Please refer to the document in the Support CD, "Guide to SATA Hard

Disks Installation and RAID Configuration", which is located in the folder

at the following path:

.. \Information\Manual\RAID Installation Guide

After step1, 2, 3, you can start to install Windows 2000 / Windows XP / Windows XP

64-bit.

NOTE. If you install Windows 2000 / Windows XP / Windows XP 64-bit on IDE HDDs and

want to manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII

HDDs, you still need to set up "SATAII Operation Mode" to [RAID] first. Then, please

set the RAID configuration by using "RAID Utility for Windows Guide" in Windows

environment. Please refer to the document in the Support CD, "Guide to nVidia RAID

Utility for Windows", which is located in the folder at the following path:

.. \Information\Manual\RAID Utility for Windows Guide

2.11

2.11 Untied Overclocking T

2.11

Untied Overclocking Technology

Untied Overclocking T

This motherboard supports Untied Overclocing Technology, which means during

overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you

enable Untied Overclocking function, please enter "Overclock Mode" option of BIOS

setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is

untied during overclocking, but PCI and PCIE buses are in the fixed mode so that FSB

can operate under a more stable overclocking environment.

1 8

ASRock K8NF4G-SATA2 Motherboard

echnology

Tabla de Contenido