Bissell POWERFORCE 1668 Serie Guia Del Usuario página 4

Assembly
WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating
procedures.
You will need the following to assemble:
Handle & Hose
Body
1
2
1
1 - Connect one 2 - Connect both
extension wand extension wands
to the handle. together.
2
To connect hose,
find the hose
connector location
on top of unit.
4
Attach floor
tool to hose
and slide in
holder on
back of unit
to store.
www.BISSELL.com
6
Extension Wands
Floor Tool
3
3 - Connect the 4 - To use 2-in-1 tool,
bottom extension attach to end of
wand to floor tool. wand when needed.
3
"Click"
Floor Tool Cleaning Modes:
5
1
1 - Hard Floor Cleaning Mode 2 - Carpet Cleaning Mode
Maintenance:
WARNING
To reduce the risk of electrical shock, turn power switch o and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
1
2-in-1 Tool
3
4
Twist right
until you hear
Lift canister door to access the bag.
a click to
secure.
5
2
Replace bag in unit by sliding back in place
and closing lid.
Replacement Bags (x3) - 160-8099
Changing Bag
2
4
Lift
to open
Bag
Pull handle
to open
To remove bag,
slide towards
back of unit.
www.BISSELL.com
7