Connecting The Light To The 24 V Supply Voltage (Selv); Functions Of The Light; Operating Functions - Waldman TANEO STLZ 12 Instrucciones Para El Uso

Functions of the light

5.3 Connecting the light to the
24 V supply voltage (SELV)
NOTICE
Material damage caused by wrong
mains voltage.
Damage or destruction of the light.
X The connection must be made by a
skilled electrician only.
X Compare the mains voltage with
the nominal voltage and the fre-
quency specified on the rating
plate and make sure that they are
identical.
X Operate the light with safety extra
low voltage (SELV) only.
2
No. Designation
1 DC +
2 DC -
3
Not connected
Tab. 2: Pin assignment.
NOTE: Please observe the pin assignment
and the socket assignment.
X Plug the plug into the socket provided
for this purpose.
6. Functions of the light
Depending on the light model, the light has
different functions. If you want to find out
which functions the light has, see chapter 2
"Model overview" , page 19.
6.1

Operating functions

Switchable
This function can be used to switch the
light on and off.
Dimmable
This function is used to change the bright-
ness of the light.
Suitable for EPA
Lights with this function can be grounded
and are suitable for use in electrostatically
protected areas (EPA).
1
3
ENG
23