Pro-Fix System; Fitting And Removing The Seat - JANE KENDO Manual Del Usuario

F. PRO-FIX SYSTEM
The chassis of your pushchair includes the PRO-FIX system, ready
for you to attach the JANÉ accessories available on the market
(KOOS, MICRO or MATRIX), fitted with the PRO-FIX connectors sui-
table for the KENDO model.
The PRO-FIX system makes it easy to attach and remove these ac-
cessories to and from the chassis, with a quick, simple and safe
operation, that anchors them securely to the chassis. To do this
follow the instructions for each accessory carefully.
WARNING: Before using this product, always make sure that
!
the locking devices of the accessories are correctly enga-
ged by pulling the accessory upwards
G. FITTING AND REMOVING THE SEAT
With the PRO-FIX system the seat can be fitted facing you (rear fa-
cing position) a when the child is very small or facing outwards
9
(forward facing position) as the child grows.
To do this, connect the seat from above and fit it onto the PRO-FIX
connectors on the chassis, until you hear it CLICK into place.
IM 2043_KENDO inst ALTA.indd 27
WARNING: Put the parking brake on when fitting or removing
!
the seat.
WARNING: Make sure that the seat is securely anchored to
!
the chassis by gently pulling it upwards.
WARNING: Never take the seat off the KENDO chassis while
!
the child is still sitting in it.
To take the seat off the chassis, simultaneously press the unloc-
king levers found on both sides of the seat and pull it
WARNING: Use the seat belts whenever the child is sitting or
!
lying in the seat.
b
9
c
9
upwards.10
EN 27
19/7/18 21:26