The Fountainhead Group Smith Deck Manual De Uso Y Cuidado página 3

Assemble Hose To Tank
IMPORTANT: Do not attempt to heat or alter hose,
hose nut, or barb prior to assembly.
1. Align hose barb tabs, push hose barb into tank
until it stops (See Figure A).
2. Slide hose nut into place and turn clockwise to
tighten. (See Figure B).
NOTE: Do not use tools to tighten hose nut.
Assemble Extension, Shut-Off & Nozzle
1. Install the extension onto the shut-off
assembly and tighten the nut securely.
(See Figure C)
2. Install selected nozzle onto the end of the
extension and tighten securely. (See Figure D)
SELECT USING NOZZLE CHART BELOW
F
B D
A C
G
H
Also accepts TeeJet® tips
NOZZLE SELECTION VARIES BY
MODEL PURCHASED (NOZZLES
INCLUDED WITH YOUR SPRAYER
ARE SHOWN ON CARTON).
HIGH VOLUME (RED)
C.
FAN NOZZLE USES:
Cleaning decks, fences,
and siding.
Cleaning concrete.
For broad coverage of
large areas like lawns.
ASSEMBLY INSTRUCTIONS
A. Adjustable Nozzle
B. Max Volume Fan Nozzle (Brown)
C. High Volume Fan Nozzle (Red)
D. Low Volume Fan Nozzle (Yellow)
E
E. High Performance Foaming Nozzle
F. Cap Nut
G. O-Ring (pre-assembled to extension)
H. Extension
A. ADJUSTABLE NOZZLE USES:
LOW VOLUME (YELLOW)
D.
FAN NOZZLE USES:
Figure A
Figure C
Spot spraying in or around
flower beds, trees, and shrubs.
Edging along fences, driveways,
and walkways.
Killing weeds.
Feeding ornamentals and
vegetables.
Control insects.
For precision spraying in
confined areas such as gardens
and flower beds.
Figure B
Figure D
MAX VOLUME (BROWN)
B.
FAN NOZZLE USES:
Sealing decks, fences, and
siding.
Killing mold and mildew on
roofs and siding.
Note: Only available on certain models.
HIGH PERFORMANCE
E.
FOAMING NOZZLE
Foaming / Cleaning
High volume fan- Flat
spray for broad coverage.
Note: Only available on certain models.
Page 3