Care And Maintenance - TaoTronics TT-BA09 Manual Del Usuario

1. Follow the previous instructions in the "Pairing" section to pair
the TT-BA09 with your rst device.
2. Turn off the Bluetooth function on your rst device, tap the
®
Power Button twice to pair and connect to your second
device.
3. Turn on the Bluetooth
® function on your rst device. In
approximately 10 seconds, the rst device will automatically
connect in.
Note:
• When you pair with two devices, both can play music at the
same time.
• The adapter will automatically re-pair when powered on.
In RX mode:
In RX mode, the adapter is able to pair with two Bluetooth
devices at the same time.
1. Follow previous instructions in the "Pairing" section to pair the
TT-BA09 with your rst device. Disable the Bluetooth
on your rst device. Tap the Power Button twice to pair with the
second device.
2. Turn on the Bluetooth of the rst device, now the TT-BA09
®
adapter is successfully paired with both devices.
Note:
• Only one device can play music at any time. You have to stop
the music on one device to play on the other.
• The adapter will automatically re-pair when powered on.

Care and Maintenance

• Do not expose the adapter to direct sunlight or extreme heat.
• Do not try to take the adapter apart. It may cause serious damage.
• Do not drop or knock the adapter on hard surfaces as it may
damage the interior circuitry.
• Do not use chemicals or detergents to clean the product.
• Do not scrape the surface with sharp objects.
®
Troubleshooting
function
®
My adapter will not power on.
Please recharge it and make sure the adapter has enough
battery power. Plug the unit into a charger and see if the LED
indicator turns red.
09/10