Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning the brush housing
• Clean the brush housing with a damp
cloth.
Installing/Replacing the brush roller
• Reinstall the brush roller.
In order to reinstall the brush roller,
you must set the white traveller of the
roller into the white traveller in the
nozzle head. The ribs of the traveller
on the brush roller must be set into
the correct cutouts on the traveller of
the nozzle body.
• Reinsert the brush holder and turn it
2
clockwise until the rotation lock en-
gages.
1
Cleaning the transport wheels
• Before and after every use of the ma-
chine, clean the running surfaces of
the transport wheels with a damp
cloth.
The transport wheels can become
soiled by transport over the asphalt.
Cleaning the machine
Attention:
Never clean the machine with a high-pres-
sure cleaner or water jet.
Water ingress in the machine may cause
considerable damage to the mechanical or
electrical parts.
• Wipe the machine with a moist cloth.
Storing / parking the machine (not in operation)
Notice:
The machine must be switched off and the
plug must be removed from the mains
socket.
Notice:
Store the machine with the tool lifted.
Thus, the tank can dry,
and the generation of mold and unpleas-
ant odors is prevented.
68
Service, maintenance and care
The maintenance of the machine is a prerequisite for impec-
cable operation and a long service life.
Attention:
Use original TASKI parts only; otherwise,
any warranty and liability claims will ex-
pire.
Legend:
◊ = whenever cleaning is completed, ◊◊ = every week,
◊◊◊ = every month
Activity
Wash out the squeegees
Clean the brush roller
Periodically check the length of the bristles
Replace the brush roller
Suction channel maintenance cover
Clean/replace the motor protection filter
Wash out the sponge filter
Replacing pump protection filter
Clean the machine with a moist cloth
Cleaning the transport wheels
Service intervals
TASKI machines are high-quality machines that have been
checked for safety in the factory and by authorized inspectors.
Electrical and mechanical parts are subject to wear and aging
after a longer period of use.
• In order to maintain operational safety and readiness for
use, the machine must be serviced after 500 working hours
or at least once a year.
Notice:
In case of extraordinary use and/or insuffi-
cient maintenance, shorter intervals are
required.
Service center
Please always indicate the type and number of the machine
whenever you contact us for order placing or in case of mal-
functions.
The required data are provided on the nameplate of your ma-
chine. The address of your closest TASKI service partner is
provided on the last page of these instructions of use.
●
66
●
67
●
●
67
●
62
●
67
●
67
●
67
●
●
68
Publicidad
Capítulos
