TROuBleSHOOTInG
ISSue
Equipment does not function
No reception
Reception Interference (static)
Feedback (screeching, static)
Noise (static, beeping)
The buttons are not working
Picture works but there is no sound
Picture is black and white
Day/night vision is whitewashed
The rechargeable battery will
not charge
Maintenance
•
Clean the surfaces of the camera and monitor with a soft, fluff-free cloth
•
If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care to not allow water into any openings
•
Never use cleaning agents or solvents
•
Confirm that the camera and monitor are ON
•
The battery may be depleted; charge battery
•
The power adapters may not be properly connected
•
Camera and monitor may not be properly paired; follow PAIRING instructions
•
Camera may be too far away from the monitor
•
Extend the antenna on the monitor
•
The camera and monitor may be too far apart
•
The battery power may be too low
•
Other electronic devices may be interfering with the signal
•
The camera or monitor may be placed too close to many metal objects
•
The camera and monitor may be too close together
•
The volume on the monitor may be set too high
•
Battery power may be too low
•
LOCK/UNLOCK Button is in LOCKED position; move to UNLOCK position
•
Volume setting may be too low
•
Night vision LEDs may be ON; increase the amount of light in the room being monitored
•
Ensure that night vision light sensor is pointed away from a wall and is not covered.
•
The power adapters may not be connected
•
Battery pack may not be properly connected inside the battery compartment
21
POSSIBle SOluTIOn