KNOW YOUR PRESSURE WASHER
Read the owner's manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
Recoil Starter
Nozzle Extension
Fuel Cap
Adjustable Nozzle
Throttle Control
Lever
Choke Lever
Air Filter
Pump
Adjustable Nozzle – Adjust for high or low pressure;
narrow or fan spray.
Air Filter – Dry type filter element limits the amount of
dirt and dust that gets in the engine.
Choke Lever - Used to help start a cold engine.
Detergent Pick–Up Tube and Filter – Used to siphon
detergent from chemical bottle to the low pressure
water stream.
Fuel Cap – Fill fuel tank with regular unleaded
gasoline here.
High Pressure Hose – Connect one end to the spray
gun and other end to the high pressure outlet.
High Pressure Outlet – Connection for high pressure
hose.
Model Data Decal – Provides model and serial number
of pressure washer. Please have these readily available
when calling for assistance.
Spray Gun
Model Data Decal
Nozzle Extension – Attached to spray gun for more
convenient use.
Oil Fill Cap and Dipstick – Check and fill engine with
oil here. See page 7 for oil recommendations and
filling instructions.
Pump – Develops high water pressure.
Recoil Starter – Used for starting the engine.
Spray Gun – Controls the application of water onto
cleaning surface with trigger device. Includes safety
latch.
Throttle Control Lever – Sets engine in starting
mode for recoil starter and stops running engine.
Water Inlet – Connection for garden hose.
5
High Pressure Hose
Oil Fill Cap and Dipstick
Water Inlet
High Pressure Outlet
Detergent Pick–Up
Tube and Filter