Operation; Brushing Teeth - Nevadent NAZ 2.4 C3 Instrucciones De Uso

Operation

This toothbrush has 3 different power levels:
–
–
–
■ Press the On/Off switch 3 once to activate the "Clean" mode . The "Clean"
LED 4 lights up .
■ Press once more to switch to "Sensitive" mode . The "Sensitive" LED 5 lights up .
■ Press a third time to switch to "Massage" mode . The "Massage" LED 6
lights up .
■ To switch the toothbrush off, press the On/Off switch 3 once more .

Brushing teeth

WARNING!
Due to the unaccustomed effect of the toothbrush, there may be some
initial gum bleeding . This is normal . If this continues for more than two
weeks, you should consult your dentist .
1) Place the brush head 1 on the handset .
2) Moisten the brush under flowing water .
3) Put a little toothpaste onto the wet brush .
NOTE
To avoid spray, do not switch on the appliance until it is in your mouth .
4) Use the On/Off switch 3 to select the desired operating mode .
NOTE
This toothbrush has a 30-second interval timer, so that all four jaw quad-
rants can be cleaned evenly .
NAZ 2.4 C3
"Clean": normal speed, orange "Clean" LED 4
For cleaning the teeth .
"Sensitive": slow speed, green "Sensitive" LED 5
For cleaning the teeth if you have sensitive gums .
"Massage": slow speed with short breaks, yellow "Massage" LED 6
For massaging the gums .
GB │ IE │ 21 ■