Base Installation; Door Handle Installation - Conglom QL029 Manual Del Usuario

Installation (continued)

BASE INSTALLATION

CAUTION:
Do not rest or bump the leveling feet on the
side as this may cause them to detach or break .
1 . Unpack the unit and place the sink (B) on a blanket or cardboard
to protect the surface .
2 . Turn the cabinet (A) upside down onto the protective surface.
3 . Gently attach the cabinet base (G) onto its proper location. Using
the supplied base screws (J), attach the base to the cabinet.
4 . Attach cabinet feet (K) to the base.
5 . Gently place the cabinet upright .

DOOR HANDLE INSTALLATION

Insert the door handle screws (H) into the pre-drilled holes on
1 .
each door .
Attach the door handles (G) and tighten the door handle
2 .
screws (H).
Peel and stick rubber door bumpers (M) to the inner bottom
3 .
corners of the doors (optional).
QL029
A
G
8 8
J
G
K
H