IB_KH1510_E238_UK_5.qxd
Intended Use
This appliance is intended for use in areas in which
immediate warmth may be required, e.g. on nappy
changing tables, bathrooms and hobby-rooms, for
occasional use in domestic households.
This appliance is NOT intended for the heating of
rooms, for use in vehicles, for industrial or commercial
applications or for use outdoors.
Use only the accessories and spare parts that are
specified for this appliance. Other parts are possibly
not sufficiently suitable or safe!
Technical data
Power supply:
Nominal power
consumption:
IP Protection type:
Dimensions (L x W x H):
Weight :
Power cable length:
Pull switch length:
Swivel range:
Appliance Overview
Items supplied:
1 x Electric heater
1 x Wall bracket
3 x Long screws
3 x Plugs
3 x Washers
1 x Short screw
1 x Operating instructions
24.10.2007
15:54 Uhr
220-240 V ~ / 50 Hz
600 Watt
X2
645 x 145 x 105 mm
1,2 kg
180 cm
40 cm
15° upwards
32° downwards
- 17 -
Seite 17
Appliance:
q
Adjustment handle
w
Heater with protective grill
e
Control lamp
r
Pull switch
t
Wall bracket with screws/plugs
Assembly
Observe these details for your per-
sonal safety, and to avoid fire and
fatal risks through electric shock:
• The heater may only be used when it is firmly
fixed at the location of use.
• The heater may only be fixed horizontally onto
a wall, not vertically and not on the ceiling.
• Do not assemble the heater below a wall power
socket.
• Maintain the following spacings:
– min. 65 cm to inflammable materials,
such as textiles, wood etc.
– min. 35 cm above the appliance,
– min. 20 cm to the sides, and
– min. 180 cm below the appliance.
– min. 100 cm to the baby.
– min. 60 cm to the bath, measured from the
edge of the bath
– min. 120 cm from the shower, measured from
the mid-point of the water exit location