Oki MFR Serie Guia Del Usuario página 8

SmartHeat & Calibration
SmartHeat technology establishes and retains heater idle temperature by virtue of Curie effect
inside the heater core. This phenomenon occurs at the atomic level and consequently idle
temperature cannot shift over time nor can it be altered by the operator. Accordingly the
system requires absolutely no calibration. Contact us at support@okinternational.com
Specifications
Ambient Operating Temperature
Maximum Enclosure Temperature
Input Line Voltage
Input Line Frequency
Recommended Air Pressure Input
Power Consumption
Output Power
Output Frequency
Power Cord 3-Wire
Dimensions w x d x h
Certification / Marking
Tip-to-Ground Potential
Tip-to-Ground Resistance
Idle Temperature Stability
Desolder Hand-piece Cable Length
Other Hand-piece Cable Length
Hand-piece Connector
Workstand Dimensions w x d x h
Warranty
Please visit OK International's web page (www.okinternational.com) where you will find
available information on systems, accessories, technical notes, and more.
OK International warrants the MFR against any defects in materials or workmanship for one
(1) year from the date of purchase by the original owner. This Warranty excludes normal
maintenance and shall not apply to any opened, misused, abused, altered or damaged items.
If the product should become defective within the warranty period, OK International will repair
or replace it free of charge at its sole option. The repaired or replacement item will be shipped,
freight prepaid, to the original purchaser. The warranty period will start from the date of
purchase. If the date of purchase cannot be substantiated the date of manufacture will be
used as the start of the warranty period.
The MFR-HPS/-HDS handpiece uses a coil assembly which is a consumable item. OK
International warrants the coil assembly against material and workmanship defects for a
period of 30 days. For contact details for Warranty and Support look for your local office
details at: www.okinternational.com
www.okinternational.com
10- 40°C
55°C
100- 240 VAC, grounded circuit
50/60 Hz
450kPa (65PSI) MFR-PS2X only
75 Watts max. (MFR-PS2K), 70 Watts max. (MFR-
PS2X)
50 Watts max. at 22°C ambient temperature
450 KHz
183cm (18/3") SJT
170mm (7") x 200mm (8") x 152.5mm (6")
cTUVus, CE
<2mV
<2 ohms
± 1.1°C in still air
L=152cm (60"), burn proof, ESD safe
L=122cm (48"), burn proof, ESD safe
8-pin circular DIN
100 mm (4") x 200 mm (8") x 100 mm (4")
MFR Rev. 2/13/2006
8