Cleaning And Maintenance; Maintenance Of The Motor Top - Bona DCS25 Manual De Funcionamento

Cleaning and Maintenance

The machine must always be emptied after use. If the
machine is left with dust, there is a risk of self-ignition.
Read the chapter about safety precautions before cleaning and maintenance.
The easiest way to clean the machine is as follows:
• The Pre-filter is cleaned as required.
• Wipe the machine on the outside with a dry or damp cloth.

Maintenance of the Motor Top

The motor top is made of maintenance-free parts and
therefore needs no daily maintenance, apart from external
cleaning and check that the cords and plugs are undamaged.
The easiest way to clean the motor top is with a damp cloth.
Do not aim jets of water directly at the motor top.
In order to avoid stop in operation and also to make sure that
the safety of the vacuum cleaner is intact, it is recommended
that the electrical parts are inspected annually by an
authorized technician.
Check / maintenance of the machine
Description
Check/replacement of brushes
Check of HEPA filter and machine
Emptying and cleaning
Check of filters and machine, generally
Check of cord, plugs and outlet for tools
Check of alarm (beeper)
Reordering of filters and service parts
Brushes
Pre-filter / membrane filter
HEPA filter
Collection bags
20 20
IMPORTANT!
The machine must not be connected to the
power supply during service and cleaning.
It is recommended to have an authorized service centre
inspect the motor bushings of the brushes after approx. 800
working hours, and if necessary, replace them. In this way the
life of the suction motor is prolonged.
If the brushes are not replaced before being completely
worn out, the motor may seize up, and this may require a
replacement of the motor.
Before/After use
After use (as required)
Before use
Before use
Before use
XX.XX.XXXX
84.67.xxxx
84.67.5006
84.64.0333
DCS25 Manual
Month/year Hours
750–800
yearly