Disposal Of Used Filters - Bona DCS25 Manual De Funcionamento

Change of Filters
To ensure a dust-free emptying when replacing the HEPA-filter, the following procedure must be followed:
Pull a plastic bag (100 my or
equivalent) over the filter.
Now, carefully pull the filter
off the rod bolt.
DO NOT jerk or twist the
filter, as it can damage the
rod bolt.
22
Close the bag using a cable
binder.
Disposal of the filter should
always follow the existing
rules regarding the vacuumed
material.

Disposal of Used Filters

When disposing of the old filters, you must make sure that the requirements of the environmental
authorities are followed.
Check the sealing surfaces
before the new filter is
mounted.
Then mount the new filter.
DCS25 Manual
Remove the nut and plate which
hold the HEPA-filter.
For this you need a ring spanner
size 10.
Remove the nut and plate
which hold the HEPA-filter.
Tighten with approx. 25nM .